Parts Required
AnalogLamb ESP32 Programmer with CH340 USB to Serial Chip – analoglamb.com
MTA6 – RS Components 543-7750 (requires assembly tool – any 2.54mm SIL connector will do if you already have alternative tooling)
7/0.2mm² cable – RS Components 214-0661
15.9mm Clear heatshrink – RS Components 873-9191
Assembled programming adapter
Ensure you cut away the heatshrink over the "EN" button so it isn't permanently pressed down.
Use a permanent black marker to mark pin 1 on the connector so its obvious when plugging onto the PCB header.
USEFUL?
We benefit hugely from resources on the web so we decided we should try and give back some of our knowledge and resources to the community by opening up many of our company’s internal notes and libraries through mini sites like this. We hope you find the site helpful.
Please feel free to comment if you can add help to this page or point out issues and solutions you have found, but please note that we do not provide support on this site. If you need help with a problem please use one of the many online forums.