Tantalum capacitors have a couple of important design advantages:-

  • They can be excellent at removing noise (for instance placed across power rails) and improving the EMC performance of a circuit.
  • They are physically small

The main downside is that they are more expensive than say an equivalent electrolytic capacitor.


It is important to derate tantalum capacitors voltage by 50% (e.g. if placing across a 0V and +5V supply rail select a 10V or higher rated tantalum capacitor).  The reasons for this are complex, but it was discovered when first developing the capacitor that it needed to be used for a significant period of time to reveal any faults and their life was greatly extended by derating down.   This is one of those rules you should just follow as a designer to ensure the longevity of your manufactured hardware.


Tantalum’s can cause really strange problems if they fail or are inserted the wrong way round.  If you’ve got something very odd going on its often a good idea to check and even try removing tantalum capacitors to see if they are the cause.

We benefit hugely from resources on the web so we decided we should try and give back some of our knowledge and resources to the community by opening up many of our company’s internal notes and libraries through mini sites like this. We hope you find the site helpful.
Please feel free to comment if you can add help to this page or point out issues and solutions you have found, but please note that we do not provide support on this site. If you need help with a problem please use one of the many online forums.


Your email address will not be published.