How Much Heat Is Created

LEDs are not 100% efficient.  Much of the power running through an LED is output as heat and needs to be dissipated. Good high power LED's, such as some Cree XLamp LEDs are over 40 or 50% efficient – that is, under normal operating conditions, approximately 50% to 60% of the input power is output as heat, while the rest of the input power is converted to light. However this is by no means the case for all LED's. To be safe where you don't have accurate data for a LED you should assume that 100% of the input power needs to be dissipated as heat.  Even for the Cree XLamp LEDs mentioned above they recommend that to be conservative you should assume the LEDs convert 25% of the input power to light and output 75% of the input power as heat. This estimate varies depending on current density, brightness and component, but is a good estimate for thermal design.

How to calculate the thermal power

Pt = Therm x Vf x If

Therm = Your thermal disipation factor, so 1 for 100%, 0.75 for 75%, etc

Pt is the thermal power (W) the heat sink must dissipate

Vf is the forward voltage of the LED (V)

If is the source current to the LED (A)

 

 

USEFUL?
We benefit hugely from resources on the web so we decided we should try and give back some of our knowledge and resources to the community by opening up many of our company’s internal notes and libraries through mini sites like this. We hope you find the site helpful.
Please feel free to comment if you can add help to this page or point out issues and solutions you have found, but please note that we do not provide support on this site. If you need help with a problem please use one of the many online forums.

Comments

Your email address will not be published. Required fields are marked *