Read Port
my_var = mPORTBRead();Read pin
if (mPORTBReadBits(BIT_10))
switches_1_read |= 0x0001;
#define EXTERNAL_POWER_PRESENT (!mPORTDReadBits(BIT_11))Write Pin
#define READY_LED_ON(state) (state ? mPORTCClearBits(BIT_14) : mPORTCSetBits(BIT_14))Write Port
mPORTEWrite(0x5555)
mPORTESetBits(0x00ff);
mPORTEClearBits(0xff00);Set Pin TRIS
#define MY_IO_DIR(state) (state ? mPORTESetPinsDigitalIn(BIT_5) : mPORTESetPinsDigitalOut(BIT_5)) //1 = input, 0 = output
USEFUL?
We benefit hugely from resources on the web so we decided we should try and give back some of our knowledge and resources to the community by opening up many of our company’s internal notes and libraries through mini sites like this. We hope you find the site helpful.
Please feel free to comment if you can add help to this page or point out issues and solutions you have found, but please note that we do not provide support on this site. If you need help with a problem please use one of the many online forums.