Programming via SD card
Press the ‘Compile’ button
Select File > Open Build Folder
Copy the .tft file created onto a microSD card (FAT32 formatted).
Insert the microSD card into the Nextion display and power it. You will see a message confirming the code is being uploaded.
Once complete the display will display a message instrucing you to remove power and remove the microSD card.
When you power it up again the new version of your interface will be there.
USEFUL?
We benefit hugely from resources on the web so we decided we should try and give back some of our knowledge and resources to the community by opening up many of our company’s internal notes and libraries through mini sites like this. We hope you find the site helpful.
Please feel free to comment if you can add help to this page or point out issues and solutions you have found, but please note that we do not provide support on this site. If you need help with a problem please use one of the many online forums.